PCB Assembly Solution
01
PCB Laser Marking Machine S-Series
PCB Laser Marking Machine S-Seriesmorel
What is PCB laser marking machine?
Code check
Read the printed data and check it (100% detection rate)
System Link
The MES server provides the code content
According to the content of the radium engraving machine, the code of the radium engraving machine is as follows:
1. Web Service: The server provides Web Service address, download interface, download back instruction, upload interface, upload back instruction, server exception information acquisition, etc.
2. TXT file import: the server completes the TXT file, the file content contains the content and format of the code, and the radium engraving machine decompresses the code content according to the format after importing the file.
3. Call DLL: The server provides DLL, related interfaces and instructions.
4.SocketClient: The server provides IP address, port, download instructions, code form and content. Not recommended, similar to Web Service but more cumbersome.
The customer does not have MES server, so the customer provides the coding format of the code content. Our IT staff develops the coding interface according to the customer's requirements, and the code content will be automatically generated according to the interface Settings of the operator, and then laser in turn.
The process of laser marking PCBs involves the movement of the PCB under a low-powered laser beam that causes gradual discoloration of the areas under focus. With the highly efficient laser marking machines, you can select the exact numbers and the QR code or barcode that you want to mark the PCBs with.
Read the printed data and check it (100% detection rate)
Equipped with the ability to control a series of actions from barcode/QR code printing to reading. Can use the reader (image processor) to read the bar code/two-dimensional code engraved by the laser marking machine, and then check with the original data to confirm whether the engraved is correct. Helps prevent the outflow of misprinted products.
Direct laser marking machine and the reader to be connected, and then read in the production instruction book recorded on the bar code/two-dimensional code data. Interconnect data with ERP/MES/MIS systems.
According to the content of the radium engraving machine, the code of the radium engraving machine is as follows:
1. Web Service: The server provides Web Service address, download interface, download back instruction, upload interface, upload back instruction, server exception information acquisition, etc.
2. TXT file import: the server completes the TXT file, the file content contains the content and format of the code, and the radium engraving machine decompresses the code content according to the format after importing the file.
3. Call DLL: The server provides DLL, related interfaces and instructions.
4.SocketClient: The server provides IP address, port, download instructions, code form and content. Not recommended, similar to Web Service but more cumbersome.
The customer does not have MES server, so the customer provides the coding format of the code content. Our IT staff develops the coding interface according to the customer's requirements, and the code content will be automatically generated according to the interface Settings of the operator, and then laser in turn.
What is PCB laser marking machine?
Code check
Read the printed data and check it (100% detection rate)
System Link
The MES server provides the code content
According to the content of the radium engraving machine, the code of the radium engraving machine is as follows:
1. Web Service: The server provides Web Service address, download interface, download back instruction, upload interface, upload back instruction, server exception information acquisition, etc.
2. TXT file import: the server completes the TXT file, the file content contains the content and format of the code, and the radium engraving machine decompresses the code content according to the format after importing the file.
3. Call DLL: The server provides DLL, related interfaces and instructions.
4.SocketClient: The server provides IP address, port, download instructions, code form and content. Not recommended, similar to Web Service but more cumbersome.
The customer does not have MES server, so the customer provides the coding format of the code content. Our IT staff develops the coding interface according to the customer's requirements, and the code content will be automatically generated according to the interface Settings of the operator, and then laser in turn.
The process of laser marking PCBs involves the movement of the PCB under a low-powered laser beam that causes gradual discoloration of the areas under focus. With the highly efficient laser marking machines, you can select the exact numbers and the QR code or barcode that you want to mark the PCBs with.
Read the printed data and check it (100% detection rate)
Equipped with the ability to control a series of actions from barcode/QR code printing to reading. Can use the reader (image processor) to read the bar code/two-dimensional code engraved by the laser marking machine, and then check with the original data to confirm whether the engraved is correct. Helps prevent the outflow of misprinted products.
Direct laser marking machine and the reader to be connected, and then read in the production instruction book recorded on the bar code/two-dimensional code data. Interconnect data with ERP/MES/MIS systems.
According to the content of the radium engraving machine, the code of the radium engraving machine is as follows:
1. Web Service: The server provides Web Service address, download interface, download back instruction, upload interface, upload back instruction, server exception information acquisition, etc.
2. TXT file import: the server completes the TXT file, the file content contains the content and format of the code, and the radium engraving machine decompresses the code content according to the format after importing the file.
3. Call DLL: The server provides DLL, related interfaces and instructions.
4.SocketClient: The server provides IP address, port, download instructions, code form and content. Not recommended, similar to Web Service but more cumbersome.
The customer does not have MES server, so the customer provides the coding format of the code content. Our IT staff develops the coding interface according to the customer's requirements, and the code content will be automatically generated according to the interface Settings of the operator, and then laser in turn.
|
single track |
single track |
Flap |
Double head |
Dual track |
|
S300U |
S450A |
S450AF |
S450AD |
S450AS |
|
S300G |
S450P |
S450PF |
S450PD |
S450PS |
|
S300M |
S450C |
S450UF |
S250AD |
|
|
S600C |
S450U |
S450GF |
S250OP |
|
|
S600P |
S450G |
S450MF |
||
|
S350A |
S450M |
S450FF |
||
|
S450F |
||||
|
Suitable for laser carving single panel |
Suitable for double-sided laser carving |
Suitable for laser carving double-sided board, high requirements for CT |
Suitable for laser engraving CT, high single-panel, saving transfer time |
|
|
Type |
Model |
Size |
Working |
Locate Model |
Equipment power |
Dimention（L*W*H) |
Weight（kg) |
|
S300 series |
S300G |
300*300 |
Laser location |
CCD+Mark |
860*1650*1550 |
550KG |
|
|
Single-track |
S450A |
450*450 |
Laser moving |
2KW |
1000*1550*1550 |
680KG |
|
|
S450P |
|||||||
|
S450C |
|||||||
|
Turning plate |
S450PF |
850KG |
|||||
|
S450AF |
450*450 |
||||||
|
S450UF |
|||||||
|
Double-end |
S450PD |
2.5KW |
1100KG |
||||
|
S250AD |
250*250 |
2.5KW |
760*1650*1550 |
1000KG |
|||
|
Dual-track |
S450PS |
single-track450*380dual-track450*270 |
2KW |
1000*1700*1600 |
800KG |
||
|
SP80 |
SP80U |
400*300 |
Laser Mobile platform |
5KW |
1450*1450*1550 |
1000KG |
|
|
SP90 |
SP90U |
500*300 |
5KW |
1600*1800*1900 |
1500KG |
||
|
PH150 |
PH150 |
180*130 |
Laser location |
CCD+Outline |
2KW |
700KG |
|
|
Desktop |
T100U |
100*100 |
Manually location |
1KW |
200KG |
||
|
S110M |
110*110 |
Rotating platform |
Mechanical location |
1.5KW |
600KG |